Skip to content

DreamCon 2024 Cosplays DIY

    Read this article on how I made two cosplays for DreamCon.


    Mizu, The Blue Eye Samurai Cosplay

    Mizu, The Blue Eye Samurai

    I went to Hobby Lobby and bought a yard of light blue fabric. I went to JoAnn and bought three yards of Medieval Blue Solid Microsuede 100% Polyester and a yard of white cotton fabric. I watched a YouTube video on how to make a cape without a sewing machine.

    I used the Medieval Blue Solid Microsuede Polyester fabric for my cape. I used a tape measure to measure the length of the cape. I laid the tape measure on the fabric and cut it. After I cut it, I used the rotary cutter and the Acrylic Ruler to make a straight line.

    Below is a YouTube video on how to made my cape.

    After I made my cape, I cut the ribbon to have enough for the cape. Afterward, I cut the white (4 inches) and blue fabric (8 inches). Then, I folded an inch of the blue and white fabric, to hide the rough edges. I used the Hem Adhesive so the folded fabric can stay adhered to the fabric. I used my iron to make it stick.

    To hide the rough edges of the cape, I used Double-Sided Fabric Tape to fold an inch of the fabric.

    I bought the robe from Amazon, Samring Women’s Lightweight Robe Soft Kimono Robes Short Bathrobe for Women Sleepwear. I had to make the length shorter. I used the Hem Adhesive and folded 8 inches. I used the iron to make it stick.

    Lastly, I bought a Ninja sword from Party City.

    Mizu, Blue Eye Samurai Cosplay

    Kurenai, Naruto Cosplay

    Kurenai Naruto

    My friends and I were the women of the Leaf Village and a mashup of the Black Panther Party. I was Kurenai, and I changed the dress from white to black to represent the Black Panther Party.

    I bought 5/8 inch of Polyester Red Ribbon to make the triangles and the stripes for the dress. Before I made the triangles, I cut out a triangle from a piece of cardboard paper. I placed the triangle on the ribbon and used the rotary cutter. I was able to get 60 triangles from it.

    I bought 8″ Black High Waisted Workout Shorts from Amazon. I used the 5/8 inch of Polyester Red Ribbon on the pants to represent the stripes. My mom and I separated the stripes by an inch and rolled it around the pants. We used a hot glue gun to make it hold. Don’t worry I wore wax paper underneath the shorts, so I wouldn’t get burned.

    I bought the dress from Amazon, OFEEFAN Women’s V Neck Sleeveless Cocktail Dresses Ruched Bodycon Dresses S-2XL. I used the Heat n Bond Hem Adhesive for Dark Fabrics, and I placed it on the dress. Then, I placed the red ribbon on top of it and ironed it. I used wax paper, so the Adhesive wouldn’t get on the iron. Then, I placed the triangles and Hem Adhesive, then I ironed them.

    I bought the red shirt from Amazon, LYANER Women’s Casual Solid Square U Neck Bell Long Sleeve Skinny Tee Shirt Top. I used the seam ripper to cut the thread off of the sleeve. I traced a line on the square u neck, then I cut it with a pair of scissors. I went to Joann’s to buy a yard of black mesh fabric for the shirt. I placed the Heat n Bond UltraHold on the shirt, then I placed the mesh on top of the UltraHold. I placed wax paper, so the UltraHold wouldn’t get on the iron. After I ironed it, then I placed the UltraHold on the mesh, so it wouldn’t fall off. I cut the length of the bell sleeve because it was long. I used the UltraHold to fold an inch of the sleeve on top of it and ironed it.

    My friend gave me the leaf village headband.

    Dreamcon Cosplay

    DreamCon Experience

    Click on the article below to read my experience at DreamCon.

    Dreamcon 2024

    Looking for more U.S. adventures? Explore my United States travel guides for more destinations, experiences, and inspiration.

    US States

    Leave a Comment

    Your email address will not be published. Required fields are marked *